HP GRACO OR PRO TI1681A - Manual (Page 65)

Accessories
309293J 65
Accessories
Air Line Accessories
Grounded Air Hose (Red Cover)
100 psi (7 bar, 0.7 MPa) Maximum Working Pressure
0.315 in. (8 mm) ID; 1/4 npsm(f) x 1/4 npsm(f) left-hand
thread; red cover with stainless steel braid ground path.
235068 6 ft (1.8 m)
235069 15 ft (4.6 m)
235070 25 ft (7.6 m)
235071 36 ft (11 m)
235072 50 ft (15 m)
235073 75 ft (23 m)
235074 100 ft (30.5 m)
Bleed-Type Master Air Valve
300 psi (21 bar, 2.1 MPa) Maximum Working Pressure
Relieves air trapped in the air line between this valve
and the fluid supply unit when closed.
107141 3/4 npt
Air Line Shutoff Valve
150 psi (10 bar, 1.0 MPa) Maximum Working Pressure
For turning air to gun on or off.
224754 1/4 npsm(m) x 1/4 npsm(f) left-hand thread.
Air Line Quick Disconnect
112534 Swiveling quick disconnect replaces stan-
dard air inlet swivel.
Air Hose Adapter Nipple
185493 Use to connect multiple air hoses. 1/4 npt x
1/4 npsm left-hand thread.
Non-Swivel Air Inlet Fitting
185105 Replaces standard swivel. Left-hand thread.
Extended Air Inlet Fitting
189191 Replaces standard swivel to provide
extended handle grip area. Left-hand
thread.
Fluid Line Accessories
245252 Shielded Waterborne Fluid Hose
100 psi (7 bar, 0.7 MPa) Maximum Working Pressure
FM Approved; PTFE; 1/4 in. (6 mm) ID x 25 ft (7.6 m)
For FM approved systems
Fluid Shutoff/Drain Valve
500 psi (35 bar, 3.5 MPa) Maximum Working Pressure
For turning fluid on or off to the gun and for relieving fluid
line pressure at the fluid supply unit.
208630 1/2 npt(m) x 3/8 npt(f); carbon steel and
PTFE; for non-corrosive fluids
246431 Unshielded Waterborne Fluid Hose
100 psi (7 bar, 0.7 MPa) Maximum Working Pressure
FM Approved; PTFE; 1/4 in. (6 mm) ID x 25 ft (7.6 m)
For compliance with EN 50059.