Harbor Freight Tools 42654 - Manual (Page 12)

Page 12 SKU 42654 For technical questions, please call 1-800-444-3353.
OPERATING INSTRUCTIONS
WARNING: Ensure that this item is completely and properly assembled
before use. Use of this item without all guards and/or safety devices in
place can result in SERIOUS PERSONAL INJURY or DEATH.
NOTE: For additional references to the parts listed below, refer to the Assembly
Diagram on page 18 of this manual.
The Power Switch:
To turn on the Compound Miter Saw, push in the Safety Button and squeeze the
Power Switch (82). To turn off the Compound Miter Saw, release pressure on the
Power Switch.
(See Figure G, and Assy. Diagram.)
DOWN HANDLE (#83)
POWER SWITCH (#82)
FIGURE G
SAFETY BUTTON
To Lower The Saw Blade:
NOTE: The Compound Miter Saw automatically locks in place in the up position.
To lower the Saw Blade (70), pull out on the Plastic Ball (51), and pull down on
the Handle (parts #80, #83).
(See Figure H, and Assy. Diagram.)
PLASTIC BALL (#51)
(PULL OUT TO LOWER SAW BLADE)
LONG SCREW (#37)
FIGURE H
REV 05/05