Harbor Freight Tools 42654 - Manual (Page 2)

Page 2 SKU 42654 For technical questions, please call 1-800-444-3353.
SPECIFICATIONS TABLE
Power Consumption 110 VAC, 60 Hz, 800 Watts, 1 HP
3 Amps w/No Load, 4.5 Amps w/Load
Power Cable 6-1/2 Feet, UL listed, 18 AWG, 2 Prong Polarized Plug
Motor Speed 4,500 RPM
Fence Dimensions 13-3/8” x 1-3/8”
Table Dimensions 15-1/4” L x 4-1/2” D
Cutting Capacity 0 to 90 Degrees: 3” H x 3-1/4” L
45 to 90 Degrees: 2” H x 3-1/4” L
Saw Blade Tilt Capacity 0 to 45 Degrees (right and left)
90 to 45 Degrees Compound
Shaft Diameter 5/8” Arbor
Scales In Inches and Degrees
Saw Blade 8-1/4”, Carbide Tipped, Saw
Features Retractable Blade Guard
Safety Power Switch
Accessories Dust Collector Bag
2 Carbon Replacement Brushes for Motor
Deep Socket Wrench
Clip Washer Wrench
Weight 15.8 Pounds
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, op-
erating, inspection, maintenance, and cleaning procedures, parts list and assem-
bly diagram. Keep your invoice with this manual. Write the invoice number on the
inside of the front cover. Keep this manual and invoice in a safe and dry place for
future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
KEEP WORK AREA CLEAN AND DRY. Cluttered, damp or wet work areas invite
injuries.
KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
this product.
STORE IDLE EQUIPMENT. When not in use, tools and equipment should be stored
in a dry location to inhibit rust. Always lock up tools and equipment and keep out
of reach of children.
1.
2.
3.
REV 02/05