HP 17 - Manual (Page 55)

mSATA drive
Description Spare part number
128-GB mSATA drive 665931-001
80-GB mSATA drive 665932-001
Before removing the mSATA drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Disconnect the battery cable from the system board (see Battery on page 39 ).
Remove the mSATA drive:
1. Remove the Phillips PM2.0×2.8 screw that secures the mSATA drive to the computer.
ENWW Component replacement procedures 47