HP 17 - Manual (Page 77)

Top speaker
Description Spare part number
Top speaker (includes cable) 665927-001
Before removing the top speaker, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 39 ), and then remove the following components:
a. Subwoofer (see Subwoofer on page 41 )
b. Hard drive (see Hard drive on page 51 )
c. Top Cover (see Top cover on page 56 )
Remove the top speaker:
1. Disconnect the top speaker cable (1) from the system board.
2. Detach the top speaker (2) from the system board. (The top speaker is attached to the system
board with double-sided adhesive.)
Reverse this procedure to install the top speaker.
ENWW Component replacement procedures 69