Heatiator ADI60S - Manual (Page 19)

19 Heatilator • ADI60S • 345-900 Rev. G • 9/08
A. Mantel Projections
Figure 10.1 shows the minimum vertical and corresponding
maximum horizontal dimensions of appliance mantels or
other combustible projections above the top front edge of
the appliance, not the surround.
10 10
Finishing
Figure 10.1 Clearances to Mantels or other Combustibles
above
Appliance
MEASUREMENTS FROM
TOP EDGE OF UNIT
12 in. MIN.
12 in. MAX.
MANTEL
EXHAUST
VENT PIPE
INLET AIR
VENT PIPE