HP Photosmart E327 - Manual (Page 57)

57 Transferring and printing images
2. Using the USB cable that
came with your camera,
connect the larger end of
the USB cable to the
corresponding connector on
the PictBridge-certified printer.
TIP: The PictBridge connector is
usually located on the front of
the printer.
3. Turn your camera on and
make sure the camera’s USB Configuration setting is set to
Digital Camera (see USB Configuration on page 63).
4. Open the door on the side of the camera nearest the lens
and connect the smaller end of the USB cable to the USB
connector on the camera.
5. When the camera is connected
to the printer, a Print Setup menu
displays on the camera. If you
already selected images to print
using the camera Playback
Menu, the number of images
selected is shown. Otherwise,
Images: ALL is displayed.
6. To change the settings in the Print Setup menu, use the
buttons on the camera to select a menu option, then
use the buttons on the camera to change the setting.
7. When the settings are correct, press the button on
the camera to begin printing.
After connecting the camera to the printer, you can print the
images you have selected for printing or all images in the
camera.