Horizon Fitness RST5.6 - Manual (Page 9)


INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
SCREW (C)
ROLLER END CAP
MAIN FRAME
ASSEMBLY STEP 2
NOTE: There is no hardware bag for this step.
A) Lift the RUNNING DECK until LOCK LATCH on side of treadmill is fully engaged.
B) Remove CONSOLE from box and place out of the way.
C) Lower the treadmill RUNNING DECK from the folded position by stepping on LOCK LATCH
on the bottom left side of the deck.
1
3
2
Open HARDWARE BAG .
Slide left ROLLER END CAP onto
MAIN FRAME and attach with
SCREW (C).
Repeat on other side.
ASSEMBLY STEP 
HARDWARE BAG  CONTENTS :
SCREW (C)
12 mm
Qty: 2
A)
B)
C)
LOCK LATCH