HoMedics IB-BPW060A - Manual (Page 11)

20 19
3. After all symbols disappear, the display
will show “00”. The monitor is “Ready to
Measure” and will automatically inflate
the cuff to begin measurement. The cuff
will then begin deflating as measurement
continues.
Note: The monitor will re-inflate
automatically if the system detects
that your body requires more
pressure for measurement.
1. Press the button to choose User 1 or
User 2.
After the user number is selected, press
the
START/STOP button to confirm the
chosen user.
2. With the cuff wrapped around your
wrist, press the START/STOP button.
Do not inflate the cuff unless it is
wrapped around your wrist. All digits
will light up, checking the display
functions. The checking procedure will
be completed after about 3 seconds.
Original Document Name: BH-LD-01-V4
Original Document Name: BH-LD-01-V4
/ START
STOP
M
OR