HoMedics IB-BPW060A - Manual (Page 7)

12 11
Measurement Error: Measure again. Wrap
the cuff correctly and keep wrist steady
during measurement.
Air Circuit Abnormality: Measure again.
Pressure Exceeding 300 mmHg: Switch the unit
off to clear, then measure again.
Error Determining Measurement Data: Measure
again.
If and any of the following letters and numbers
appear in the area that systolic pressure should be
displayed, an error has occurred with your reading.
See Troubleshooting section of this manual for more
information.
dISPLAY EXPLANATIoNS
Systolic
Pressure
Diastolic
Pressure
Date/Time Indicator
User 1: Appears when the monitor is operated
by User 1.
User 2: Appears when the monitor is
operated by User 2.
Weak Battery Symbol: Appears when batteries
should be replaced.
Pulse Symbol: Shows the pulse rate per minute.
Memory Average: Displays average of last
3 readings.
Risk Category Indicator: Compares readings
against blood pressure guidelines. See page 22
for more information.
Display Symbols:
Pulse Rate
/ START
STOP
M
(No Symbol)