Servicing your engine, The importance of maintenance, Maintenance safety – HONDA GX200 User Manual

Page 7: Safety precautions, Maintenance schedule

Advertising
background image

ENGLISH

MAINTENANCE SCHEDULE

THE IMPORTANCE OF MAINTENANCE

Maintenance, replacement, or repair of the emission control
devices and systems may be performed by any engine repair
establishment or individual, using parts that are ‘‘certified’’ to
EPA standards.

MAINTENANCE SAFETY

Injury from moving parts.

Burns from hot parts.

Carbon monoxide poisoning from engine exhaust.

SAFETY PRECAUTIONS

SERVICING YOUR ENGINE

STANDARD TYPE

INTERNAL VENT

CARBURETOR TYPE

BREATHER TUBE

BREATHER TUBE

TUBE CLIP

7

Improper maintenance, or failure to correct a
problem before operation, can cause a malfunction in
which you can be seriously hurt or killed.

Always follow the inspection and maintenance
recommendations and schedules in this owner’s
manual.

To help you properly care for your engine, the following pages
include a maintenance schedule, routine inspection procedures,
and simple maintenance procedures using basic hand tools. Other
service tasks that are more difficult, or require special tools, are
best handled by professionals and are normally performed by a
Honda technician or other qualified mechanic.

The maintenance schedule applies to normal operating conditions.
If you operate your engine under severe conditions, such as
sustained high-load or high-temperature operation, or use in
unusually wet or dusty conditions, consult your servicing dealer
for recommendations applicable to your individual needs and use.

Some of the most important safety precautions follow. However,
we cannot warn you of every conceivable hazard that can arise in
performing maintenance. Only you can decide whether or not you
should perform a given task.

To ensure the best quality and reliability, use only new genuine
Honda parts or their equivalents for repair and replacement.

Remember that an authorized Honda servicing dealer knows your
engine best and is fully equipped to maintain and repair it.

To reduce the possibility of fire or explosion, be careful when
working around gasoline. Use only a nonflammable solvent, not
gasoline, to clean parts. Keep cigarettes, sparks and flames
away from all fuel related parts.

Read the instructions before you begin, and make sure you have
the tools and skills required.

Do not run the engine unless instructed to do so.

Let the engine and exhaust system cool before touching.

Be sure there is adequate ventilation whenever you operate
the engine.

Make sure the engine is off before you begin any maintenance
or repairs. This will eliminate several potential hazards:

Failure to properly follow maintenance instructions
and precautions can cause you to be seriously hurt or
killed.

Always follow the procedures and precautions in this
owner’s manual.

Good maintenance is essential for safe, economical and trouble-
free operation. It will also help reduce pollution.

Internal vent carburetor with dual element type only.
Cyclone type every 6 months or 150 hours.

Replace paper element type only.
Cyclone type every 2 years or 600 hours.

Service more frequently when used in dusty areas.

These items should be serviced by your servicing dealer,
unless you have the proper tools and are mechanically
proficient. Refer to Honda shop manual for service procedures.

For commercial use, log hours of operation to determine
proper maintenance intervals.

Failure to follow this maintenance schedule could result in non-
warrantable failures.

(1)

(2)

(3)

REGULAR SERVICE PERIOD (3)

ITEM

Perform at every

indicated month or

operating hour interval,

whichever comes first.

Check level

Change

Check level

Change

Check

Clean

Replace

Clean

Check-adjust

Replace

Clean

Check-adjust

Check-adjust

Clean

Clean

Check

Each

Use

First

Month

or

20 Hrs

Every 3

Months

or

50 Hrs

(1)

Every 6

Months

or

100 Hrs

(1)

(2)

Every

Year

or

300 Hrs

(2)

(2)

After every 500 Hrs. (2)

Every 2 years

(Replace if necessary) (2)

Engine oil

Reduction case

oil

(

)

Air filter

Sediment cup

Spark plug

Spark arrester

(

)

Idle speed

Valve clearance

Combustion

chamber

Fuel tank &

filter

Fuel tube

Refer

to

Page

9

9

9

10

10

10

11

12

12

12

13

13

Shop

manual

Shop

manual

Shop

manual

Shop

manual

applicable types

applicable types

05/06/17 17:23:57 32Z4F601_007

Advertising