HoMedics Professional HEPA Air Cleaner AR-10 - Manual (Page 4)

6 7
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: This appliance has a polarized plug (one blade is wider than
the other). To reduce the risk of shock, this plug is intended to fit only
one way in a polarized outlet. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety feature. To do so could result in
an electric shock hazard.
Control Panel
CLEAN FILTER
1 2 3
Operating Instructions
Turning the Unit On
• Take the air cleaner out of the box and remove the clear protective plastic bag.
• Place the air cleaner on a firm level surface.
• Before turning the air cleaner ON, you need to confirm that the filter is firmly in place
and did not become loose during shipping.
1. To check filter, open the front grill by
gently pulling on the tabs on either side
of the top of the grill plate.
2. Open the plate outward until the tabs at
the bottom of the grill plate easily slide
away from the unit.
Clean Filter Indicator
Speed Selection (Low/Medium/High)
Power ON/OFF Control
Fig. 1
Fig. 2