HoMedics Professional HEPA Air Cleaner AR-10 - Manual (Page 6)

10 11
Problem Possible Cause Solution
Unit will not operate • Unit is not plugged in
• No power at unit • Plug unit in
• Press the POWER
button to turn the
power on
• Check circuits, fuses,
try a different outlet
Reduced airflow or poor
filtering • The front grill may be
blocked
• HEPA filter may be
clogged • Check to make sure
nothing is blocking the
front grill and air outlet
• Check and clean filter
• Replace the filter
Excessive noise • The unit is not level • Place the unit on a flat,
even surface
3. Remove the HEPA filter from the main
unit.
4. Use the brush attachment with your
vacuum cleaner. Run the attachment
along both sides of the HEPA filter,
cleaning thoroughly between the
accordion folds of the filter.
5. Place the clean HEPA filter back in the
main unit, making sure that it is firmly
seated inside the unit.
6. Place the tabs at the bottom of the
grill plate into the base of the unit.
Gently push the grill plate back into
place until you hear a click sound
indicating that the grill is firmly
latched.
DO NOT USE WATER OR ANY HOUSEHOLD CLEANERS OR DETERGENTS
TO CLEAN THE HEPA FILTER.
It is recommended that you replace the HEPA filter every 18 months to
maintain the optimal performance of your air cleaner. To purchase the
HEPA replacement filter, go back to your retailer (where you purchased
your air cleaner) or visit www.homedics.com
Troubleshooting
Fig. 7 Fig. 10
Fig. 8
Fig. 9