Hyundai DVD Receiver With Bluetooth H-CMD7079 - Manual (Page 14)

14
General operations
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press RESET button to
restore the unit to the original factory settings.
Power button
Press POWER button to turn on the unit. Press POWER to switch the power off. When you switch off the system or
car ignition, the settings, tuner presets and the volume level will be retained in the unit’s memory.
Mode selection
Press the MODE button to cycle the play mode between RADIO, DISC PLAY, USB, SD Card and AUX modes.
Volume adjust
Rotate the VOL/SEL knob on the panel or press the VOL+/VOL- buttons on the RC to adjust the volume level.
Setting the sound and other characteristics
Press repeatedly the VOL/SEL knob on the panel to select the audio setting: VOL => BAS => TRE => BAL =>
FAD => LOUD OFF => LOC OFF => STON => EQ OFF.
VOL: rotate the VOL/SEL knob on the panel or press the VOL+/VOL- buttons on the RC to adjust the volume
level.
BASS, TREBLE, BALANCE, FADER: rotate the VOL/SEL knob to regulate each setting.
LOUD: rotate the VOL/SEL knob to turn it on or off.
LOC: rotate the VOL/SEL knob to turn the local reception on or off.
STEREO: rotate the VOL/SEL knob to turn the stereo reception on or off.
EQ: select the following equalizer modes by rotating the VOL/SEL knob: OFF => CLASSIC => POP =>