Hyundai DVD Receiver With Bluetooth H-CMD7079 - Manual (Page 39)

39
Answering call on the front panel
When there is an incoming call, press ANSWER button to receive a call in your unit. You can perform this function
on the front panel or on the RC.
Ending call on the front panel
When you have finished a call, or you do not want to answer it, press END CALL button anytime to hang up.
“Hang up” will be displayed on the LCD. You can perform this function on the front panel or on the RC.
Auto Connect
This unit supports the “Auto Connect” function. In case the connected cellphone is out of reach (e.g. the user leaves
the car for lunch), when the cell phone is available again, the unit will automatically connect with the cellphone so
that you do not have to set connection in the cellphone. If the auto connect does not work, press ANSWER button
so that the unit will connect to the last device (cellphone).
Melody
After pressing PHONE button, press and hold VOL/SEL knob until the display shows “MELODY 1”. Rotate the
VOL/SEL knob to choose from MELODY 1 to 6 as different incoming music tone in the unit.
Speaker Volume
After pressing PHONE button, press and hold VOL/SEL knob until the display shows MELODY, and then press it
once, “TEL” will be shown. You can select from “0” to “39”. The larger the number is, the larger the speaker
volume during the telephone call.
A2DP Stereo Transfer
The function is for the cellphone, which is built-in with A2DP stereo transfer functions. Play the music in the
cellphone, and then choose the option of “play via bluetooth” in the cellphone. The music from cell phone will be
transfered to BT PLAY mode automatically. You can now listen to the music from the cellphone through the car