Hyundai DVD Receiver With Bluetooth H-CMD7079 - Manual (Page 5)

5
Installation method A
WARNING: Disconnect negative battery terminal from battery before starting installation. Consult the vehicle’s
owner’s manual for proper instructions.
Remove two transport screws from the top of the unit before installation.
1. After removing the old unit and mounting sleeve, insert supplied mounting sleeve in the opening.
2. Bend the tabs on the mounting sleeve to keep the mounting sleeve firmly in place.
3. Attach wires from the unit to existing wires. See wiring connections diagram. Insert the unit into dashboard.
Then apply the trim frame to outside of the unit.
4. Support the unit using supplied rear mounting bolt and steel bar.