Honeywell ENERGYPRO T8665D - Manual (Page 17)

17 69-1538
Press the Run Program key to
cancel the temporary temperature
setting before the designated time.
After selecting a temporary setting, the display reads
“Temporary” until cancelled. Example display shows
temporary heat setting of 70° at 6:00 AM.
If or appears under temperature display,
both heating and cooling
setpoints are being
adjusted. Tapping or
key changes both heat and
cool setpoints one degree.
(Press i key after setpoint is
reached to verify setpoints.)
Changing and Holding Temperature
Setting Indefinitely
1. Press Hold Temp key once.
2. Press increase or decrease key to
change temperature setpoint, if desired.
M14564
Mon
System
Fan
Heat
Auto
AM
Heat
Temporary
80 90 70 60
90 80 70 60
Run
Program
Hold Temp