Honeywell ENERGYPRO T8665D - Manual (Page 33)

33 69-1538
7. Press increase or decrease key until
desired temperature setpoint displays.
Press increase or decrease to select cooling
Wake temperature. Example display shows cooling
Wake period set for 76°.
8. Press Leave, Return or Sleep and repeat
steps 3 through 6 to program entire day.
The day (first day of a 7-day schedule) is
now programmed.
IMPORTANT
Repeat steps 1 through 7 for each day
of the week that has a different
schedule from the first day. Or refer to
Copying a Day section to copy any
programmed day to another day.
9. Press Run Program key to return to
normal operation.
Copying a Day
The thermostat must be in program mode to
use the copy feature. Go to
step 2 if the thermostat is
already in program mode
(set program displays in
upper left corner).
M14592
Set Program
Mon
Wake
System
Fan
Heat
Auto
AM
Cool
Setting
80 90 70 60
90 80 70 60
Leave Return Sleep
Run
Program