Honeywell ENERGYPRO T8665D - Manual (Page 37)

37 69-1538
3. Press and hold Leave, Return or Sleep
key until start time and temperature set-
ting clear (approximately three seconds).
Press and hold Leave, Return or Sleep key to clear
the period for that day. Example display shows
Saturday Leave period cleared.
NOTE: Wake cannot be cleared.
You do not have to program a replacement time
for the remaining periods;
for example, Wake and
Sleep. If you clear only
Leave and Return periods
for Saturday (or any day),
thermostat remains in Wake
period for all of Saturday
until Sleep period.
4. Repeat steps, as necessary, for all
periods to be cleared.
5. Press Run Program key to
return to normal operation.
M14599
Set Program
Leave Heat
Sat
Setting
80 90 70 60
90 80 70 60
Run
Program
Leave Return Sleep