Hawking Technology HNC290G - Manual (Page 45)

45
7.8 Viewer Utility Setting
Click the Setting button . The camera’s setting window will then appear.
Note: When you want to change settings such as the IP Address, Video Port, etc. in the “Setting” option, you must first
disconnect the camera by clicking the Stop button.
7.8.1 Setting
Setting
Name It is not required that you fill in a camera name in order to connect to
the camera. It is only for users to identify the camera.
IP Address IP address/Domain name of the network camera.
Video Port The number of the service port used by the network camera.
Model Select “MJPEG Camera”. (This camera only supports Motion JPEG).
Motion Record Check this box to enable motion-triggered recording. Whenever the
camera detects motion, it will trigger a 30-second video recording. The
user is not able to change the duration of this recording. The period is
always 30 seconds.
Username The user name for logging into the network camera. By default, the
user name is “Admin”.
Password The password for logging into the network camera. By default, the
password is “1234”.
Discover Click “Discover” and the camera’s auto-discover window will appear. The
window will show all the discovered cameras on the LAN environment for
you to select.