Humminbird 531427-1_D - Manual (Page 13)

6
NOTE: Your 700 Series™ does not support Navionics® Classic Charts, only Navionics® Gold,
HotMaps™, and HotMaps™ Premium.
Your unit also comes with a built-in Uni-Map™ with a more detailed map of North America
(Domestic models) or a more detailed map of Europe and Southeast Asia, including Australia and
New Zealand (International models).
Your 700 Series™ uses the GPS Receiver to determine the position of the boat automatically, and
uses the zoom level settings on a particular view to select the best chart to display. See Viewing
Cartography
for more information.
Multi-Media Card (MMC)/SD Slot
Your 700 Series™ Fishing System also has a multi-media
card (MMC)/SD slot that is used to insert optional-
purchase cards containing additional detailed maps. If
you insert an MMC/SD that contains a more detailed
chart for a particular location, your 700 Series™ Fishing
System will retrieve that chart and display it
automatically. Use the illustration to locate the position
of the MMC/SD slot cover, remove the MMC/SD slot
cover, then insert the MMC/SD into the slot. The label on
the MMC/SD should face toward the right side of the unit. Press down on the card until it
clicks into place, then replace the slot cover, making certain that the gasket is present and
positioned correctly before re-installing the cover, then replace and tighten snugly - do NOT
overtighten, as this will not improve water resistance, and may damage the cover.
Software Updates
Use the MMC/SD slot to update the software version of your control head. To update the
software in your control head, plug in the appropriate MMC/SD card that contains a software
update file; the unit will recognize it, will tell you what software version your control
head is currently running, and will ask you if you want to update the software in the unit
to match that on the MMC/SD card. You can obtain software updates from the
www.humminbird.com
website.
Inserting an MMC/SD
into the Card Slot