Gps diagnostic view, Pc connect – Humminbird 531427-1_D User Manual

Page 45

Advertising
background image

38

GPS Diagnostic View

GPS Diagnostic View shows a sky chart and numerical data from the GPS receiver. The sky chart
shows the location of each visible GPS satellite with its satellite number and a signal strength bar.
A dark grey bar indicates that the satellite is being used to determine your current position. A light
gray bar indicates that the satellite is being monitored, but is not yet being used.

This view also reports the current position, local time and date, and other numeric
information. The current GPS Fix Type is reported as No Fix, 2D Fix, 3D Fix, or Enhanced. An
Enhanced fix has been augmented using information from WAAS, EGNOS, or MSAS. A 3D or
Enhanced Fix is required for navigation. HDOP (the Horizontal Dilution of Precision) is a GPS
system parameter which depends on the current satellite configuration. HDOP is used to
calculate the Estimated Position Error.

PC Connect

(with PC Connect cable only)

Use PC Connect to update the software of the 700 Series™ Fishing System control head. This
feature requires the use of the PC Connect Cable. Complete instructions are included with the
PC Connect Cable accessory.

NOTE: The PC Connect Cable requires a separate purchase. For more information visit our website at
www.humminbird.com or contact our Customer Resource Center at 1-800-633-1468.

Exit PC Connect mode by powering the 700 Series™ Fishing System off.

GPS Diagnostic View

Satellite Being

Monitored

Satellite Being
Used

Current Latitude

and Longitude

Sky Chart

Advertising