HP TM 11-6625-2779-14&P - Manual (Page 76)

F - Direct Support
H - General Support
D - Depot
e. Column 5, Tools and Equipment. Column
5 specifies by code those common tool sets (not
individual tools) and special tools, test, and support
equipment required to perform the designated function.
f. Column 6, Remarks. Column 6 contains an
alphabetic code which leads to the remark in section IV,
Remarks, which is pertinent to the item opposite the
particular code.
B-4. Tool and Test Equipment Requiremen ts (Sec
III)
a.
Tool or Test Equipment Reference Code.
The number in this column coincide with the numbers
used in the tools and equipment column of the MAC.
The numbers indicate the applicable tool or test
equipment for the maintenance functions.
b. Maintenance Category. The codes in this
column indicate the maintenance category allocated the
tool or test equipment
c. Nomenclature. This column lists the noun
name and nomenclature of the tools and test equipment
required to perform the maintenance functions.
d. National/NATO Stock Number. This
column lists the National/NATO stock number of the
specific tool or test equipment.
e. Tool Number. This column lists the
manufacturer's part number of the tool followed by the
Federal Supply Code for manufacturers (5-digit) in
parentheses.
B-5. Remarks (Sec IV)
a.
Reference Code. This code refers to the
appropriate item in section II, column 6.
b. Remarks. This column provides the
required explanatory information necessary to clarify
items appearing in section II.
(Next printed page B-3)
B-2