Haicom HI-405BT - Manual (Page 30)

29
6.3 DEFAULT VALUES
The product has the following factory preset default values:
The new settings will remain effective on next power-on as long as
the on-board rechargeable backup battery is not discharged. After
the backup battery is discharged, factory preset default settings will
be used.
Datum:
NMEA Enable Switch:
Baud Rate:
Elevation Mask:
DOP Mask:
Receiver Operating Mode:
000 (WGS-84)
GGA ON
GLL ON
GSA ON
GSV ON
RMC ON
VTG ON
Checksum ON
4800 bps
5 degrees
DOP Select: Auto
GDOP: 20
PDOP: 15
HDOP: 8
Normal Mode (without 1PPS)