Haicom HI-405BT - Manual (Page 6)

5
STEP 4:
By pressing the power button on the top of HI-405BT (Keep push
the power button for 2~3 seconds, the power will turned on), the
red light on the side of HI-405BT stay on (the GPS not get 3D fixed
yet) and the GPS receiver start searching the satellite data. Please
make sure place the HI-405BT outdoor open space without blocking
so that it can get the proper satellite signal. After the receiver get
enough satellite data, the receiver is in 3D fixed and the red light
start blinking.
Keep pressing for power turn on or turn off
Stay on: HI-405BT searching satellites
Blinking: HI-405BT lock on more than 4 satellites and in 3D fix