Hitachi 1000 - Manual (Page 28)

28 BladeSymphony 1000 Architecture White Paper www.hitachi.com
Figure 18. Outside view of the Embedded Fibre Channel Switch Module
The Fibre Channel switch within the module consists of 14 ports compatible with the 4 Gb/sec. Fibre
Channel standard. Eight ports are connected internally to the FC-HBA of up to eight FC-HBA + Gigabit
Ethernet Combo Cards, and six of the ports are external ports used to connect to external storage.
Figure 19 depicts the back view of the module and a blow up of the Fibre Channel switch. The block
diagram for the module is shown in Figure 20.
Figure 19. Back view of Embedded Fibre Channel Switch Module with blow up of the Fibre Channel
switch
(2) RJ-45 connector
(1) Serial Port (3) Error LED
(Fiber channel switch close-up)
SFP SFP SFP SFP
RJ45
(10) Fibre Channel port status LED
(green/orange, green/orange) (7) Option LED (Green)
(8) Fibre Channel
switch status LED
(green/orange)
(9) Power status LED
(green)
(4) LAN LED Link speed (green)
(5) LAN LED Link status (orange) (6) SFP port/SFP module
4Gbps FC-SW
SFP SFP