HP 2500C/CM - Manual (Page 7)

3
(Go) • Places the printer either online or offline.
• Allows the printer to resume printing after being offline. Clears
most printer messages and places the printer online.
• Allows the printer to continue printing with a warning message
such as TRAY x LOAD [TYPE] [SIZE] or UNEXPECTED PAPER SIZE.
• Exits the Control Panel menus. (To save a selected Control Panel
setting, first press the [Select] button.)
• Displays non-recoverable error codes.
[Cancel Job] Cancels the print job that the printer is processing. The time it takes
to cancel depends on the size of the print job. (Press it only once.)
[Menu] Cycles through the Control Panel menus. To print a menu map from
the Control Panel:
1. Press [Menu] until SELF TEST MENU appears.
2. Press [Item] until PRINT MENU MAP appears.
3. Press [Select] to print the menu map.
For information on each menu item, see LCD Messages.
[Item] Cycles through the selected menu’s items.
[Value] Cycles through the selected menu item’s values.
[Select] • Saves the selected value for that item. An asterisk (*) appears next
to the selection, indicating that it is the new default. Default
settings remain when the printer is switched off or reset unless
you reset all factory defaults from the [RESETS] menu.
• Prints the selected printer information page from the Control Panel.
LEDs
There are 2 lights or LEDs on the printer:
Led Indicators Color Function
Ready LED Green Is lit up when the printer is printing, in
normal state, OR when it is online.
Attention LED Red Blinks when the printer is in an error state,
OR requires attention.
For more information, see Troubleshooting section.
Control Panel Keys
USG_EuCM.qxd 18/1/99 10:10 AM Page 3