HP 2500C/CM - Manual (Page 9)

5
1. Remove the four tapes securing the printer. Open the top cover and
remove the fifth tape from the inside of the printer.
1. Ensure that the computer is turned off.
2. Plug the power connector firmly into the printer’s power socket.
3. Plug the power plug into an electrical outlet.
To connect the printer directly to the computer:
1.
Connect the printer end of the parallel cable firmly to the parallel
port on the printer.
2. Snap both clips onto the notches on the connector.
3. Connect the computer end of the parallel port on your computer and
tighten the screws on the connector.
The HP 2500CM Professional Series Color Printer comes with a built-in
HP JetDirect internal print server.
To connect the HP 2500CM printer to the network, plug the network cable
into the network port on the print server. For more information on
configuring the printer in a network environment, refer to the Network
Guide which is available on your HP 2500C/CM Starter CD.
2500C/CM HP Step 3 - Connect Cables
2500C/CM HP Step 2 - Remove All Tapes from the Printer
USG_EuCM.qxd 18/1/99 10:11 AM Page 5