System set-up – HONDA 2008 Accord 00X31 TA5 8000 User Manual
Page 100
Navigation System
99
System Set-up
Switching Display Mode Automatically
I
Recommended Display mode Day/Night settings:
• With the headlights on, select mid range for the dash illumination (see Owner’s manual for location of knob).
• With the headlights off, select mid range for the dash illumination (see Owner’s manual for location of knob).
• On the SETUP “Color” adjustment screen, choose White for the map Day display, and black for the map Night display (
see
page 98
). Inappropriate adjustment of these colors can cause the Day/Night modes to appear inoperative.
• Remember that once the Display mode button
is selected, the other display mode controls are overridden until the
vehicle is restarted.
NOTE:
See the vehicle Owner’s manual for additional information regarding the dash brightness adjustment.
llumination control
Priority Operation
But remember
Display mode button
(see page 11)
1
Allows selection of Day, Night or Off display
mode. This button has the highest priority and
overrides all other display control adjustments
listed below.
Remember that once you press this button, you
assume full manual control of the display
mode until the ignition key is cycled again.
Dash illumination adjustment
knob (See Owner’s manual for
location)
2
When headlights are turned on, and you wish to
have the Day display mode, then adjust the
illumination to the full bright setting (beeps).
Remember to adjust the dash brightness back
to mid-range to allow auto switching by
sensing the headlights are on or off.
Headlights (Auto/On/Off)
3
When turned on, it changes the display to the
Night display mode. The previous two
controls listed above can “cancel” this function.
Use the
Display mode button
, or
adjust the dash illumination to full bright to set
the display to your desired choice.
Map Day/Night screen color
choice (see page 98 for the
Day and Night color choices)
N/A
The user can select the color of the screen that
will be displayed for the Day, and Night
display modes described above.
For best contrast, ensure that the Map “color”
is white for Day, and black for Night.