Getting started – HONDA 2008 Accord 00X31 TA5 8000 User Manual

Page 21

Advertising
background image

20

Navigation System

Getting Started

Map Screen Description

Zoom In/Out

Rotate the Interface Dial knob to
change the map scale. Zooming in
increases the detail, while zooming out
gives you a wide area view. After
changing the scale, give the system a
few moments to update the display.

Map Scrolling

To view other map areas, move the
Interface Dial left, right, up, or down.
The map will shift in that direction. To
return the map to your current location,
press either the MAP/GUIDE, the
CANCEL, or the NAVI BACK button.

Displaying Current Location

You can see the current address,
latitude, longitude and elevation at any
time by doing one of the following:

• Use the voice control system and say

“Display current location.”

• Push in on the Interface Dial, select

Show Icon on Map, push in on the
Interface Dial again, and then move
the Interface Dial left to select the
CURRENT LOCATION.

The Current location screen will
appear on the display.

NOTE:
The elevation will not appear when the
system is temporarily lacking proper
GPS information. The system elevation
may not agree with elevations shown on
roadside elevation signs, and may
fluctuate plus or minus 100 feet or more.

You can save the current location in
your Address Book by doing one of the
following:

• Use the voice control system and say

“Save current position.”

• Push in on the Interface Dial and

select Save, and then push in on the
Interface Dial again.

Select Return to return to the previous
screen.

Advertising