Using rear rack installation, Using rear rack installation -8 – HP 263924-002 User Manual
Page 25
Installing the IP Console Switch
2-8
HP IP Console Switch User Guide
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: c-ch2 Installing.doc
Codename: Eagle Part Number: 263924-002 Last Saved On: 3/31/03 3:13 PM
Using Rear Rack Installation
IMPORTANT: If you are installing a console switch with a 1U component, such as the 1U
Keyboard Drawer Rack Option Kit, additional rack space is not required, making it a
0U installation.
To install the IP Console Switch in the rear of the rack:
1. Attach the slide rail brackets to the console switch, using two screws on
each slide.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
100-240V
, 1.0A, 50
/60 Hz
T 2A, 250
VAC C
AUTION:
For continued protection against risk of fire, replace only with same type and rating of fuse.
Figure 2-6: Attaching the slide rail brackets