HP 263924-002 - Manual (Page 26)

Installing the IP Console Switch
HP IP Console Switch User Guide 2-9
HP CONFIDENTIAL
Writer: Amy L. Laffitte File Name: c-ch2 Installing.doc
Codename: Eagle Part Number: 263924-002 Last Saved On: 3/31/03 3:13 PM
2. If a cage nut is not already installed behind the rear rail, install one at this time.
3. Slide the console switch, with the slide rail brackets, into the rail-mounting
brackets already installed in the rack.
1
2 3
4 5
6 7
8 9
10 11
12 13
14 15
16
100-240V , 1.0A, 50/60 Hz
T 2A, 250 VAC CAU
TION: For contin ued prote ction again st risk of fir e, replace only with same typ e and ratin g of fuse.
Figure 2-7: Sliding the console switch into the rack
4. Secure the slide rail brackets to the rear of the rack, using two screws on
each side.
1
2 3
4 5
6 7
8 9
10 11
12 13
14 15
16
100-240V , 1.0A, 50 /60 Hz
T 2A, 250 VAC C AUTION: For contin ued prote ction again st risk of fi re, replace only with same typ e and ratin g of fuse.
Figure 2-8: Securing the slide rail brackets to the rack