Hotpoint SE48R1012GX - Manual (Page 7)

GB
7
- Press the button to stop cooking.
- Set a new cooking mode (previous settings will be
reset).
If a blackout occurs while the oven is already in
operation, an automatic system within the appliance
will reactivate the cooking mode from where it was
interrupted as long as the temperature has not
dropped below a certain level. Programmed cooking
modes which have not started will not be restored
and must be reprogrammed.
 There is no preheating stage for the BARBECUE
mode.
 Never put objects directly on the bottom of the
oven; this will avoid the enamel coating being
damaged.
 Always place cookware on the rack(s) provided.
Cooling ventilation
In order to cool down the external temperature of the
oven, a cooling fan generates a stream of air which
escapes between the oven control panel and the
oven door.
 Once the cooking has been completed, the cooling
fan continues to operate until the oven has cooled
down sufficiently.
Oven light
When the oven is not in operation, the lamp can be
switched on at any time by pressing the button.