Maintenance, Care and cleaning, Exterior surfaces – hussmann P/N 0420057_B User Manual

Page 31: Interior surfaces, Do not use, Notice, Warning, Caution

Advertising
background image

P/N 0420057_B

5-1

Service Merchandisers

CARE AND CLEANING

Long life and satisfactory performance of any
equipment is dependent upon the care it
receives. To ensure long life, proper sanitation
and minimum maintenance costs, these mer-
chandisers should be thoroughly cleaned, all
debris removed and the interiors washed down,
at least weekly.

Exterior Surfaces
The exterior surfaces must be cleaned with a
mild domestic detergent and warm water to
protect and maintain their attractive finish.
N

EVER USE ABRASIVE CLEANERS OR SCOURING

PADS

. D

O

NOT

USE AMMONIA BASED CLEANERS

ON ACRYLIC PARTS

.

Interior Surfaces
The interior surfaces may be cleaned with most
domestic detergents, ammonia based cleaners
and sanitizing solutions with no harm to the
surface. Removable parts are labeled R

EMOVE

FOR CLEANING

.

Removable stainless steel parts may be cleaned
and sanitized in dishwasher.

See next page for detailed direction.

Do Not Use:

Abrasive cleansers and scouring pads, as
these will mar the finish.

A hose on lighted shelves or submerge the
shelves in water.

Solvent, oil or acidic based cleaners on any
interior surfaces.

Do:

Remove the product and all loose debris to
avoid clogging the waste outlet.

Store product in a refrigerated area such as a
cooler. Remove only as much product as can
be taken to the cooler in a timely manner.

Turn off refrigeration, then disconnect
electrical power.

Thoroughly clean all surfaces with mild
detergent and water (105 to 140°F / 40 to
60°C). D

O NOT USE STEAM OR HIGH WATER

PRESSURE HOSES TO WASH THE INTERIOR

.

T

HESE WILL DESTROY THE MERCHANDISER

S

LINER AND SEALS CAUSING LEAKS AND POOR

PERFORMANCE

.

Lift or remove fan plenum for cleaning.
Hook chain in rear panel to secure plenum
during cleaning. Be sure to reposition the fan
plenum after cleaning merchandiser.

Take care to minimize direct contact between
fan motors and cleaning or rinse water.

Rinse with water, but do NOT flood. N

EVER

INTRODUCE WATER FASTER THAN THE WASTE

OUTLET CAN REMOVE IT

.

Allow merchandisers to dry before resuming
operation.

After cleaning is completed, turn on power
to the merchandiser.

HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.

MAINTENANCE

Do NOT use HOT water on COLD glass

surfaces. This can cause the glass to

shatter and could result in personal
injury. Allow glass fronts, ends, and

service doors to warm before applying

hot water.

CAUTION

!

Product will be degraded

and may spoil if allowed to sit

in a non-refrigerated area.

NOTICE

Prevent injury.

A

LWAYS SHUT POWER OFF

during cleaning process.

WARNING

!

Advertising