HONDA Accord Accessory HandsFreeLink 2008 - Manual (Page 11)

© 200 8 American Honda Motor Co., Inc. - All Rights Reserved. 11
Phone Pairing
You must first pair Accessory HFL (establish a
communication link) to your Bluetooth hands-free
profile cell phone. Please refer to your cell phone’s
operation manual for instructions on how to place
your cellular phone into a pairing mode before
starting the pairing process. In order to complete
successful pairing, both your cell phone and the
Accessory HFL module must be in a pairing mode
at the same time. Accessory HFL will remain in a
pairing mode for about 3 minutes before timing out.
1. Engage the parking brake on the vehicle.
2. Press and release the Accessory HFL PHONE
button and say “Set up.” For example, say “Set
up” at the Main menu and Accessory HFL
prompts “Select one of the following: phone
pairing, confirmation prompts, select phone, or
say cancel to return to the main menu.” If there
is no response to the prompts, Accessory HFL
reminds you of the selection two more times
until you select an option. If there is no option
selected after two repeats, Accessory HFL will
Setup
power down.
3. Say “Phone pairing.”
4. After the system prompts you, say “Pair a
phone.” The system will remind you that pairing
should only be completed while the vehicle is in
park. When the vehicle is in park with the
parking brake engaged, say “Continue.”
5. The system will then ask you for a 4-digit PIN.
This can be any number you choose as long as
you enter the same number on the phone later.
Say your 4-digit PIN. For example: “One-Two-
Three-Four.”
6. Follow your cell phone manufacturer’s
instructions for placing your cell phone in a
pairing mode.
7. Select BlueConnect on the phone. Then, on the
phone’s numeric keypad, enter the same PIN
number as entered in step 5.