HONDA Accord Accessory HandsFreeLink 2008 - Manual (Page 17)

© 200 8 American Honda Motor Co., Inc. - All Rights Reserved. 17
Setup
Select A Phone
This option is used to override the phone priority
given during pairing. For example, if you wish to use
phone
3 to make an outgoing call, you would
select phone 3 and make the call. This override only
works for the current ignition ON cycle. Accessory
HFL switches back to the highest priority phone
once the ignition is turned off. You can select a
phone using the VR button during a phone listing, or
by the select phone command.
Select phone by name.
1. At the main menu, say “Set up phone pairing.”
Accessory HFL prompts you with available
options.
2. Say “List paired phone.”
3. Accessory HFL lists all phones that are paired.
4. When the name of the desired phone is heard,
press and release the VR button and say
“Select.”
5. Accessory HFL sets this phone to the highest
priority for the rest of the current ignition ON
cycle. Accessory HFL temporarily overrides the
phone priorities for the rest of the current
ignition ON cycle.
Select phone by number.
1. At the main menu, say “Set up.” The system
prompts you with available options.
2. Say “Select phone.”
3. The system lists the available phones and asks
for the number of the phone. Say the number of
the phone.
4. Accessory HFL verifies the selected phone
name and asks if it is correct. Say “Yes” if
correct, or “No” if not.
5. Accessory HFL sets this phone to the highest
priority for the rest of the current ignition ON
cycle. This temporarily overrides the phone for
the rest of the current ignition ON cycle only.