Humax HFA100 - Manual (Page 23)

**
MUTE
Push to mute audio on your TV if controlled by the HFA100 remote.
**
FORMAT
This button lets you change the picture aspect ratio, depending on the program format.
**
CH ADD/SKIP
Add a channel you are watching to memory, or delete it from memory.
**
SIGNAL
Check signal quality of the program you are watching.
**
TV/INPUT
Change input of your TV if controlled by the HFA100 remote.
**
TV/STB
Toggle between control of the HFA100 and your TV. Use IR programming codes on pages
**
INFO
Push this button to find out a DTV station's virtual channel (such as 3-1) and callsign. Depending on how
much EPG information the station is transmitting, you may also see the program name, rating, current time,
and program interval. Pushing INFO a second time will show a description of the program* as well as the
video format, audio format, and whether multiple language tracks are present.
**
MENU
Push this button to access the HFA100 menus (described on pages 14-18).
**
CH LIST
Push this button to see a list of DTV channels saved into memory. You can select any channel by scrolling to
it and pushing the OK button.
**
GUIDE
This button brings up an electronic program guide window. The current program is displayed in a small
window, while information on the station, the current time and date, the program name and description, and
program interval appear to the left.
If the broadcaster is providing detailed program guide information, will appear at the bottom. Press
INFO button to view the detailed information.
**
* Where available
**
Remote Control Functions
22
**
**
**
**
**
**
**
**
**
**
**
**
**
**