Humax HFA100 - Manual (Page 27)

**
To program the HFA100 remote control for your TV, locate the appropriate three-digit code from the following
list. You may have to try more than one code for your brand of TV to enable the remote.
**
**
1. Push the TV button on the remote and hold. The TV LED indicator will flash once.
2. After three seconds, the TV LED indicator will turn on. Continue to push the TV button.
3. While pushing the TV button, enter the three-digit IR code for your TV from the table.
4. After you have entered the last digit, release the TV button. The TV LED will blink twice to confirm your
entry.
5. If you have entered the correct code, your TV will turn on or off.
6. If your TV does not respond, repeat steps #1 through #3 until it does.
**
**
IR Codes For Compatible TVs
26
**
**
**
**
**
**
**
**
**
**
**
**
**
**