Hilti TE 7-C - Manual (Page 4)

ORIGINAL OPERATING INSTRUCTIONS
TE 7
‑C rotary hammer
It is essential that the operating instruc-
tions are read before the power tool is op-
erated for the first time.
Always keep these operating instructions
together with the power tool.
Ensure that the operating instructions are
with the power tool when it is given to
other persons.
Contents Page
1. General information 1
2. Description 2
3. Insert tools, accessories 4
4. Technical data 4
5. Safety instructions 5
6. Before use 8
7. Operation 8
8. Care and maintenance 10
9. Troubleshooting 11
10. Disposal 12
11. Manufacturer’s warranty - tools 12
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out
cover pages. Keep these pages open while studying
the operating instructions.
In these operating instructions, the designation “the
power tool” always refers to the TE 7-C rotary ham-
mer.
Operating controls and parts 1
@
Chucks
;
Function selector switch
=
Control switch
%
Forward / reverse switch
&
Side handle with depth gauge
(
Interface for TE DRS
‑M dust removal module
)
Supply cord
1. General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that could lead
to serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation
that could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation
that could lead to slight personal injury or damage to
the equipment or other property.
NOTE
Draws attention to an instruction or other useful
information.
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Warning:
electricity
en
1