HP 240A - Manual (Page 14)

14 2 HP-GL Mode Settings
About Mode Menu
This HP-GL mode menu is used to set items specific to HP-GL and HP-GL/2 emulation.
You can change the mode menu settings while the printer is printing. When this is done, the
changed settings take effect from the next job.
The mode menu is configured from the following levels.
• Mode menu > Menu item > Item > Candidate value
Note
• Some menu items do not have items.
Sometimes the items are divided into item 1, item 2, and item 3. (Called item hereafter.)
The diagram shown above represents a portion of the levels in the HP-GL mode menu.
Refer to
• Operations and items that can be set: “2.2 HP-GL Mode Menu Settings” (P. 15)
HPGL Features Menu Paper Tray Auto
Tray 1
Tray 2
Output Size A Size
A4
A5
Document Size Auto
Output Size
A0
Stored Jobs Menu At startup Factory
No. 01 - 10
Retrieve Factory
No. 01 - 10
Mode menu Menu item Item Candidate value