Honeywell TE821WD - Manual (Page 10)

10
· Moon Phase calendar and historical data for the past and future 39 days
· Dual crescendo alarms with programmable snooze
Weather
· Weather forecast for the next 12 to 24 hour in seven large icons: Sunny, Partly Cloudy, Cloudy, Light Rain, Heavy
Rain, Unstable Weather and Snowy
· Barometric pressure in imperial or metric units
· Altitude adjustment for pressure compensation
· 24 hour barometric pressure history chart
· Multiple weather alerts including: Hi/Low temperature, Daily Rainfall, Hi wind gust and Hi wind speed alerts
· Indoor/Outdoor Temperature & Humidity in up to 4 remote locations (additional sensors required)
· Dew point and comfort level indicators
· Wind direction, speed and wind gust averages and memory
· Rainfall amount with minimum and maximum memory
· Operating range from 100 feet (30 meters) up to 328 feet (100 meters)
Display
· Light sensor detects low light conditions and LCD lights up automatically when adapter is connected
Power
· Open the battery compartment door on the back of the main unit.
· Insert four (4) AA size batteries according to the polarities shown and replace the battery compartment door.
· Connect 7.5V AC/DC adapter provided to the main display unit and plug into the wall power outlet.
Note: The AC/DC adaptor connection is required for automatic backlight control. When the main unit operates
solely on the battery power, the auto backlight control functions are disabled.
· When placing the main unit on the table or other horizontal surface, connect the table stand to the back of the unit.
· When mounting the main unit on the wall or vertical surface, detach the table stand and use the mounting hardware
Placement tips
· Make sure that the main unit is locating within the operating range of all remote sensors.
· Ideally the remote sensors should be mounted within the line of sight of the main unit.
· Transmission range may be affected by trees, metal structures and electronic appliances.
· Test reception before permanently mounting all the remote sensors.
Avoid placing the main unit in the following areas:
· Direct sunlight and surfaces emitting and radiating heat, such as heating ducts or air conditioners.
· Areas with interference from the wireless devices (such as cordless phones, radio headsets, baby listening devices)
and electronic appliances.