HP 7.25 - Manual (Page 22)

22 7.25 TREADMILL
ASSEMBLY
STEP 4:
Connect the Upper Section Computer Wire (109) to the Middle Section Computer
Wire (308) and the Upper Section Safety Key Wire (108) to the Middle Section
Safety Key Wire (307).
Connect the Upper Section Hand Pulse Wires (111) to Lower Section
Wires (207) and Upper Section Motion Control Wires (115) to Lower
Section Wires (308) for each side.
Attach the Upright Cover RL (304) and Upright Cover LR (303).
Secure
using four #8 x 19mm Screws (806) and four #8 x 19mm Metal Screws (807).
Fix the console (100) with 4 screws (806
) to upright covers (304-305).
806
X4
807
x4