HP 7.25 - Manual (Page 31)

www.smoothfitness.com 31
COMPUTER OPERATION
OPERATING INSTRUCTIONS:
QUICK START
When the treadmill is in POWER ON status, press the START button to activate the QUICK START program. The SPEED LED will
count down 3 seconds with 3 short beep sounds then start from 0.5 mph / 0.8 km/h. Press the SPEED UP/DOWN buttons to
change the speed. Press the INCLINE UP/DOWN buttons to elevate the treadmill. The TIME, CALORIES and DISTANCE will
count up from 0.
PAUSE / STOP
During the workout press the STOP/ENTER button once to pause the treadmill. Press the STOP/ENTER button twice to delete all
workout data and return to POWER ON status.
COOL DOWN
After completion of each program the TIME LED window will
show “COOL” and blink then start a one-minute cool down
procedure. Time counts down from 01:00 to 00:00 and speed
stays at 2 mph / 3.2 km/h and the incline level stays at level 0.
After the time counts down to 00:00 the belt stops and returns to
PAUSE/STOP status. Press the STOP/ENTER button to return
to POWER ON status. To escape the cool down procedure
press the STOP/ENTER button once anytime during the process
to enter the PAUSE/STOP status and press the STOP/ENTER
button again to enter the POWER ON status.
FITNESS-TEST
The Fitness-Test function is the feature to let the user test their physical condition during a workout. The fitness rating is determined
by measuring how quickly the user’s pulse slows down and with that measuring the user physical condition. The faster the pulse
slows down, the better the user’s physical condition. User’s can record their fitness rating to use for reference. To start the Fitness-
Test, press the “Fitness-Test ” button toward the end of a workout (while your pulse is still under trainings load). The treadmill will
enter the PAUSE/STOP status. Put both hands on the hand pulse sensors within 10 seconds (for models equipped with a chest belt
pulse transmitter, keep the chest belt on, no need to hold the hand pulse). The pulse receiver will scan and detect the user’s pulse
in 10 seconds and enter the Fitness-Test function. TIME counts down from 01:00 to 00:00. After the count-down the SPEED LED
window will show the Fitness rating (1-6). The lower the number the better your fitness. Record the rating for future comparison.
After completion of the Fitness-Test (1 minute) the training can be resumed by pressing the START button.
During the Fitness-Test, if you want to stop the function and stop workout, press the STOP/ENTER button and return to POWER ON
status.
During the Fitness-Test, if you want to continue the previous program, press the START button to continue the previous program.
After pressing the Fitness-Test button, if the pulse receiver fails to scan and receive the user’s pulse the computer will stay at
PAUSE/STOP status. Press the STOP/ENTER button to return to POWER ON status or press the START button to continue the
previous program.
The Fitness-Test cannot be activated while in the COOL DOWN
COMPUTER OPERATION:
Before selecting the program, a user ID needs to be selected. For the first time user, please set up the user information and assign
your USER ID from U 1 to U 9. Press the SPEED UP/DOWN buttons to select the user ID when the computer is in POWER ON
mode.
SET UP USER INFORMATION
After selecting the USER ID the SPEED LED window will show the previous setting for user body weight or the factory setting value
of “150” lbs or “68” kg and be blinking. Press the SPEED UP/DOWN buttons to set the user height then press the STOP/ENTER
button to confirm and save.
After setting the user height the TIME LED window will show the previous setting for user height or the factory setting value of “67”
inches or “170” cm and be blinking. Press the SPEED UP/DOWN buttons to set the user body weight then press the STOP/ENTER
button to confirm and save.
After setting the user weight the PULSE LED window will show the previous setting for user age or the factory setting value of “35”
and be blinking. Press the SPEED UP/DWON buttons to set the user age then press the STOP/ENTER button to confirm and save.