HP 7.25 - Manual (Page 32)

32 7.25 TREADMILL
COMPUTER OPERATION
SELECT OPERATING PROGRAM
After completing the user information set up the SPEED PROFILE LED window will show “P1”. Press the SPEED UP/DOWN
buttons to select a P1 – P8 program or C1-C3 user program then press the STOP/ENTER button to confirm. Prior to starting the
selected program, follow the procedure to operate the different programs as below:
PROGRAM 1 – TARGET TIME
If P1 is selected, the TIME LED window shows “30:00” as the
preset workout time. Press the SPEED UP/DOWN buttons to
set target workout time. Press the STOP/ENTER button to save
the target time and press the START button to start the
program. Speed starts from 2.0 mph / 3.2 km/h. Incline starts
from level 0. Press the SPEED UP/DOWN buttons to adjust the
speed and press the INCLINE UP/DOWN buttons to adjust the
incline level. TIME counts down from the target time to zero.
PROGRAM 2 – TARGET DISTANCE
If P2 is selected, the DISTANCE LED window shows “0.00”.
Press the SPEED UP/DOWN buttons to set the target distance.
Press the STOP/ENTER button to save the target distance and
press the START button to start the program. Speed starts
from 2.0 mph /3.2 km/h. Incline starts from level 0. Press the
SPEED UP/DOWN buttons to adjust the speed and press the
INCLINE UP/DOWN buttons to adjust the incline level.
DISTANCE counts down from the target distance.
PROGRAM 3 – TARGET CALORIES
If P3 is selected, the CALORIES LED window shows “0”. Press
the SPEED UP/DOWN buttons to set the target calories. Press
the STOP/ENTER button to save the target calories and press
the START button to start the program. Speed starts from 2.0
mph /3.2 km/h. Incline starts from level 0. Press the SPEED
UP/DOWN buttons to adjust the speed and press the INCLINE
UP/DOWN buttons to adjust the incline level. CALORIES count
down from the target calories.