Harbor Freight Tools 95797 - Manual (Page 2)

Page 2 SKU 95797 for technical questions, please call 1-800-444-3353
SpECifiCATiONS
Materials Solar Light: Black Injection Molded PP Plastic, Clear
Injection Molded Polystyrene Lens, White Injection
Molded PP Plastic Faux Candle
Shepherd’s Hook: Formed Steel Tubing Black Powder
Coated Finish. Polycrystaline Solar Cells, Auto ON/
OFF switch
Overall Dimensions (Installed) 23-9/16” H to Top of Hook
Lens Dimension 4” OD x 3-7/8” H
Batteries 2 Rechargeable 1.2V “AA” 600mAH Ni-Cd (included)
Bulbs 1 LED Bulb (included)
Save This manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
SAfETy wARNiNGS AND pRECAuTiONS
wARNiNG: When using tool, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
Keep work area clean. Cluttered areas invite injuries.
Observe work area conditions. Keep work area well lighted.
Keep children away. Children must never be allowed to handle this product. This is
not a toy. Keep out of their reach.
use the right product for the job. Do not attempt to force this product to do the work
of a larger Lantern. There are certain applications for which this product was designed.
Do not modify this product and do not use this product for a purpose for which it was
not intended.
use eye protection. Always wear ANSI-approved impact safety goggles during set up.
Do not overreach. Keep proper footing and balance at all times. .
Stay alert. Watch what you are doing. Use common sense when positioning this
Lantern in the ground.
Avoid any hidden pipes or wiring in the ground. Be aware of where you are inserting
the Ground Stake (16) of the Solar Candle Garden Lantern.
Check for damaged parts. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
1.
2.
3.
4.
5.
6.
7.
8.
9.
REV 07d