Harbor Freight Tools 95797 - Manual (Page 5)

Page 5 SKU 95797 for technical questions, please call 1-800-444-3353
hook by a Small Loop (1) at the top of the light. See Figure 3 and Assembly Drawing
on page 7.
Choose the location for the Solar Candle Garden Lantern and stick the Shepherd’s
Hook and Ground Stake (16) into the ground, avoiding any underground wiring or
plumbing. Be sure to choose a location that gets plenty of sunshine during the day
and is not near a porch or street light at night. See Figure 3.
If the Solar Candle Garden Lantern stops working or is not holding a charge for a long
enough period, replace the batteries with identical rechargeable NiCd “AA” batteries.
See directions below for battery replacement.
FIGURE 4
Small Loop (1)
Note: The Solar Candle Garden Lantern can be removed from the Shepherd’s Hook
and Stake and used as a table Lantern. See Figure 4.
bATTERy REpLACEmENT
Turn the Top Assembly of the Solar Candle Garden Lantern slightly
counterclockwise. Remove the assembly from the top of the Solar Candle Garden
Lantern. See Figure 1 on page 3.
Take assembly off the Lantern, being careful not to disturb the wires and the internal
components. See Figure 2 on page 4.
Remove the used Batteries (8) and dispose of them properly according to the Solid
Waste Disposal regulations in your community. Replace with new Rechargeable
6.
7.
1.
2.
3.