Home Automation OmniPro II - Manual (Page 73)

The arrow keys are used to select from a list of event buttons:
•
WHEN ENERGY LO
•
WHEN ENERGY MID
•
WHEN ENERGY HI
•
WHEN ENERGY CRIT
•
WHEN PHONE DEAD
•
WHEN PHONE RING
•
WHEN PHONE OFFHK
•
WHEN PHONE ONHOOK
•
WHEN AC PWR OFF
•
WHEN AC PWR ON
•
WHEN BATTERY LOW
•
WHEN BATTERY OK
•
WHEN DCM FAIL
•
WHEN DCM OK
•
WHEN CAMERA* (PA Access only)
*When a camera input (1-6) is pressed on an OmniTouch with Video. This item can only be programmed via PC Access.
Message Event Buttons (Pro-Link)
Pressing the 8 (MSG) key allows you to select an event button from a list of the 64 text messages. You are first prompted to
select the message:
MESSAGE:
ENTER MESSAGE
↓
The message may be entered by entering the message number followed by the ' # ' key or by using the arrow keys to scroll
through the list of messages.
Pro-Link also has the capability to monitor the serial port for incoming text messages. When a text message is received, Pro-Link
searches through all 128 text messages for a matching message. If one is found, the When Message Received event button
corresponding to the matching message is activated.
Pro-Link determines that a message has been received when:
•
One or more characters have been received followed by 100 ms of silence
•
One or more characters followed by a carriage return character are received
•
One or more characters followed by a line feed character are received
It is not necessary to enter the terminating carriage return or line feed character as part of the message name.
Switch Press Event Buttons (CentraLite)
When a button is pressed on a CentraLite keypad, the "When Switch" program is activated.
Pressing the 9 (SWITCH) key allows you to select the "When Command" for a switch pressed activated event.
You are first prompted to enter the switch number:
SWITCH NUMBER:
1-127
↓
Enter the switch number followed by the ' # ' key.
Page 65