Humax CX PVR-9200C - Manual (Page 30)

5. PIP and Time Shifted Recording
5.1 Picture-in-Picture (PIP) Screen
If you press the PIP button on the remote control while watching TV, you
can watch two channels at the same time. The audio from the main screen will
be outputted.
Each time you press the PIP button, the PIP screen moves in order of 1:6
-> 1:1-> Normal, as displayed in the following figure.
**
1:6 PIP screen
**
Normal screen
**
1:1 PIP screen
**
Note:
• The PIP screen is available only when you are watching TV channels. You cannot use the PIP function for radio
channels.
• The teletext is only available on the main screen.
**
1. Swapping the PIP Screen
This function is available in 1:6 PIP or 1:1 PIP.
Press the SWAP PIP button on the remote control to swap the main
screen for the PIP screen. Press the CH+/CH- button to change the
main screen channel.
**
Note: You cannot use the SWAP PIP function in the following cases:
1. When you are watching a radio channel.
2. When the screen displays the channel list, audio and detail
information.
GB 29