Humax CX PVR-9200C - Manual (Page 69)

1. Start/Stop Frequency
Select Start/Stop Frequency using the button and press the OK
or button. Enter the frequency using the NUMERIC(0-9) buttons.
2. Step
1. Select Step using the button and press the OK or
button.
2. Select the range of frequency to be increased by each step when
activating channel search using the button and press the
OK or button. Select User Define to enter the value
directly. If you do not know the value, select Auto.
3. Network Search
1. Select Network Search using the button and press the OK or button.
2. Select Enable/Disable using the button and press the OK or button.
10. Installation
GB 68