Harman-Kardon BDP 1 - Manual (Page 10)

10
MESSAGE DISPL AY
BDVD
TITLE
USB
CD
480ip
720p 1080ip
CHAP HOUR MIN
REP
SEC
LAN
TRACK 1A-BALL
Disc Type
Video Output
Resolution Title
USB Network
Playback
Mode Parental
Lock
Repeat
Track/Chapter Time
NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support
section for this product at www.harmankardon.com.
Disc Type: Indicates the current disc as BD (Blu-ray Disc), DVD or CD.
USB: Lights when a USB drive is selected as the playback source.
Network: This indicator lights when the RJ45 jack is connected to
a live network.
Parental Lock: Lights in red when the parental-lock system is active.
Repeat: These indicators light when any of the Repeat functions are in use.
Playback Mode: These indicators light to show the current playback mode:
› Lights when content is playing in the Normal or Slow Play mode.
›› Lights in the Fast Search Forward mode, with the speed shown
on screen.
I I Lights when the disc is paused.
‹‹ Lights when the disc is in the Fast Search Reverse mode, with
the speed shown on screen.
Time: These positions show the running time of the current media.
Track/Chapter: When a video disc is playing, these two positions show
the current chapter. When a CD is playing, they will show the current
track number.
Title: These two positions show the current title number when a video
disc is playing.
Video Output Resolution: Indicates the current video output resolution.
For the HDMI Output, the resolution is set automatically to the maximum
capability of the TV, but may be changed to a lower setting. For the
Component Video Output, it must be adjusted manually by pressing the
front-panel Video Output Resolution Button, and it may be set lower
than the TV’s maximum capability. When the Composite Video Output
is in use, this indicator will always default to 480i (interlaced scan), and
cannot be changed.
NOTE: The 480i resolution is not available via the HDMI Output.
If the HDMI Output is connected simultaneously with the Composite
Video Output, this indicator will reflect the HDMI Output’s
resolution, and the signal at the Composite Video Output will
remain at 480i.